Offer | Need | All

Lime Briquetting Machine -CNY 10

Publish Date: 12-01-2017 00:17:49 | Contact name: LiZhendong | Location: CHINA | Place: Middle of Heluo Road, Gongyi, Zhengzhou city, Henan province, China | 4 times displayed |



Introduction of Lime Briquetting MachineLime briquetting machine can press the lime powder, after forming briquettes can be used as chemical reactant used in metal smelting area. Lime briquetting machine had been used in steel smelting industry widely. As to the characteristic of lime that it can not blend with water, must briquetting directly, the lime briquetting machine is also named high pressure hydraulic dry powder briquetting machine.During the lime briquetting process, the lime size should be less than 5 mm so that lime briquetting machine can press, if the lime size is large than 5mm ,the lime need to crush. The standard lime briquette size is 38mm (Length) * 25mm (Width) * 13mm (Height), lime briquettes can be made with elliptical shape, oval shape, egg shape, pillow shape, square shape etc, generally. The size can also be designed by buyer's requirements. The final briquettes produced by lime briquetting machine can be used as metal smelting accessory; it is a good chemical reactant, it is widely used in coal industry, metallurgy industry, chemical industry and other industries. The design of hydraulic dry powder briquetting machine from our company is unique, and easy to dismount and assemble. The roller is high-strength, wear-resistant, anti-corrosion and the base of lime briquetting machine is made of high strength steel plate. It can be directly placed on the hardening the ground level after assembling, without foundation treatment so that reducing the user investment and the space, convenient to install.Lime briquetting machine not only can make full use of natural recourses, but also save a lot of energy consumption and economic cost, it is a favorable energy conservation and environmental protection equipment. Zhengke lime briquetting machine had exported to Russia, USA, Australia, Ireland, Israel, India, Malaysia, South Africa, Russia, Oman, Saudi Arabia, Tanzania, Mongolia etc. all the briquetting machines are with normal operation, enjoyed good reputation from customers.Features of Zhengke Lime Briquetting Machine1. High pressure and high briquetting efficiencyLime briquetting machine is adopted with screw feeding forcing, make the materials fully supply to rollers, increase the briquettes strength, and improve the briquetting efficiency. Meanwhile this machine is equipped with hydraulic system and energy accumulator, able to keep constant pressure.2. Energy saving & environmental protectionLime briquetting machine is mainly used to press powdery industrial wastes and dust to regular shaped briquettes for further usage, reducing dust pollution and improving resource utilization ratio. Meanwhile, briquetting machine is adopted special design in mechanical structure and power control; it can run in low power, it is a favorable energy conservation and environmental protection equipment. The lime briquetting machine produced by Zhengke is adopted enclosed structure design, during briquetting; there is less pollution and noise; Wide application and low requirement for working environment. Lime briquetting machine is suitable for use in all countries around the world. According to different conditions of every country, it can be reasonable adjusted for normal use, such as voltage, engineering design requirements, geographical conditions etc. Additionally, Lime briquetting machine can be normally used in all kinds of severe environment, such as extremely cold weather, high temperature, plateau etc.3. Easy installation and simple transportationThe lime briquetting machine is designed with high strength steel plate as its support, enabling it to be directly used on hard flat area without foundation, there is no vibration during working, in addition, it is easy for users to transfer and transport this equipment.4. Few employing, simple operation and easy maintenanceThe lime briquetting machine can be designed with semi-automatic and full automatic based on customer’s requirements, thus ensuring less labor and simple operation. In daily use, you only need to do regular maintenance according to the maintenance instruction.5. High safetyAll of drive parts of lime briquetting machine such as drive shaft, gear, electric motor, belt pulley etc. are adopted enclosed or semi-enclosed design in strict accordance with the equipment safety standards, and it is outfitted with an observation table and hole on this machine, thereby ensuring equipment safety and personal safety.Main Technical Parameter of Lime Briquetting Machine:ModelZKHD530ZKHD650ZKHD750ZKHD850Roller Diameter(mm)530650750850Roller width(mm)196196-250196-250196-250The largest lineal pressure ratio (t/cm)5666Total pressure (t)100110120300Main power (kw)4555/7575/90110/132Pre-pressing power (Speed regulation) (KW)1118.518.5/2222Power of the oil pump (kw)1.5/2.22.233Speed (r/min)9999Pressed ball size (mm)38x25x1338x25x1338x25x1338x25x13Capacity (t/h)1-35-88-129-15Note: Due to the difference of each customer's materials and briquettes’ size, production capacity and configuration of briquetting machine will also be changed .At the same time; we also can configure hydraulic system according to customer demand. You can send email or calling us, inform us your material details; we will make the best solution for you according to your demand .Thank you for your support!Lime Briquetting Machine Process Flow Chart1、Raw Material2、Rated Silo3、Conveyor4、Frame5、Inlet6、Screw Forcing Feeding Device7、Reducer8、Motor9、Base10、High pressure Dry powder Briquetting Machine11、Finished products12、Discharging Conveyor13、Conveyor

Share  
    | Report bad use or Spam

Contact LiZhendong: Lime Briquetting Machine

Phone: 15838198675

*

*

*



Send me an email with links to manage my Ad

Related Ads

EPS Crusher Duster Machine offer Stationery

EPS Crusher Duster Machine

Stationery - - CNY 10

EPS CRUSHER DUSTER MACHINE 1.This machinery is ideal for the EPS Crushing and De-dust;2.Multi-purpose, it can crush agglomerate EPS materials and wasted EPS materials;3.Recycled EPS material becomes g...

EPS Crusher Machine offer Stationery

EPS Crusher Machine

Stationery - - CNY 10

(EPS) Polystyrene Crusher MachineMain Features: 1.This machine is suitable for the EPS, XPS, EPP, EPE, PU, etc, crushing;2.Simple using, just put material into the entry of the machine;3.Blade used fo...

Polystyrene Cutting Machine C Type offer Stationery

Polystyrene Cutting Machine C Type

Stationery - - CNY 10

(EPS) Polystyrene Cutting Machine C Type: Main Feature: With the expansion of the external wall insulation block market, and the defects obvious and growing of the ordinary EPS external wall insulatio...

Polystyrene Cutting Machine offer Stationery

Polystyrene Cutting Machine

Stationery - - CNY 10

(EPS) Polystyrene Cutting Machine: Main Feature: 1.The main body of the machine is welded from thick-wall square tube, It can be dismantled and assembled easily;2.The machine applies electric heating ...

Polystyrene Block Molding Machine Adjust Plate Type offer Stationery

Polystyrene Block Molding Machine Adjust Plate Type

Stationery - - CNY 10

(EPS) POLYSTYRENE BLOCK MOULDING MACHINE WITH ADJUST PLATE  Main Features: 1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the cycle process of opening and closin...

Polystyrene Block Molding Machine Vacuum Cooling Type offer Stationery

Polystyrene Block Molding Machine Vacuum Cooling Type

Stationery - - CNY 10

(EPS) POLYSTYRENE BLOCK MOULDING MACHINE WITH VACUUM COOLING TYPE Main Features: 1.With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the cycle process of opening and clo...

Polystyrene Block Molding Machine Air Cooling Type offer Stationery

Polystyrene Block Molding Machine Air Cooling Type

Stationery - - CNY 10

(EPS) POLYSTYRENE BLOCK MOULDING MACHINE AIR COOLING TYPE Main Features: 1.With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the cycle process of opening and closing of ...

Semi-auto Polystyrene Shape Molding Machine Hydraulic Type offer Stationery

Semi-auto Polystyrene Shape Molding Machine Hydraulic Type

Stationery - - CNY 10

SEMI-AUTO POLYSTYRENE SHAPE MOULDING MACHINE: Main Features: 1.The machine applies PLC and touch screen, to realize automatic production: closing template, charging (filling), heating, forming, coolin...

Semi-auto Polystyrene Shape Molding Machine Screw Type offer Stationery

Semi-auto Polystyrene Shape Molding Machine Screw Type

Stationery - - CNY 10

SEMI-AUTO (EPS) POLYSTYRENE SHAPE MOULDING MACHINE: Main Features: 1.The machine applies PLC and touch screen, to realize automatic production: closing template, charging (filling), heating, forming, ...

Auto Polystyrene Energy Saving Shape Molding Machine offer Stationery

Auto Polystyrene Energy Saving Shape Molding Machine

Stationery - - CNY 10

ENERGY SAVING AUTO (EPS) POLYSTRENE SHAPE MOULDING MACHINE  Main Features: 1.Frame Structure  a. high-strength frame: further enhanced the back and front frame, adopt machine’s body and feet as a whol...