Offer | Need | All

High Temperature Potting Compound -CNY 10

Publish Date: 30-11-2016 19:04:46 | Contact name: Qin Gao | Location: CHINA | Place: No.1129,Denghui Road,Minhang District,Shanghai,China | 3 times displayed |



If you are planning to wholesale best cheap and high quality high temperature potting compound China, or hot sale high temperature potting compound in China from professional high temperature potting compound manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.Thermally Conductive Epoxy Potting Compound SE2215            ◆Detailed Product DescriptionSE2215 is 2 component excellent adhesion and heat-resistance solvent-free room temperature curable Epoxy Potting CompoundFeatures1.Excellent adhesion, resistance to cracking2.Good toughness, high hardness3.Excellent electrical insulation properties, stability4.High thermal conductivity, low thermal expansion coefficient5.Higher Tg, can be used in the 150 ℃ -180 ℃ long-term6.Good waterproof, moisture resistance,  low water absorption 7.Flame retardant grade up to UL94 V-2UseIt is suitable for electric tools and high thermal conductivity packaging protection product requirements in automotive electronics.◆Data TableProperties before curingPartSE2215 ASE2215 BAppearanceBlack liquidBrown liquidViscosity, mPa.s(25℃)25,000±5,000100-300Density,  g/cm3(25℃)1.95±0.11.12±0.05Mixture/mass ratioA:B = 7: 1Viscosity after mixing, mPa.s (25℃)4000±500Operation time , hr(25℃)1.2Gel time ,hr(25℃)12Properties after curingHardness, Shore D≥90Expansion coefficient  μm/(m,℃)210Thermal  conductivity  W/mK1.1Glass transition temperature    ℃135Tensile-shear strength,  Mpa, Fe/ Fe≥10Dielectric strength  kV/mm(25℃)≥20Dissipation Factor(1MHz)(25℃)0.09Dielectric constant (1 MHz)(25℃)2.9Volume resistance DC500V, Ω·cm6.00E +15Temperature range ,  ℃-40~180Note:①All data above were tested under standardized condition.②All data listed in the chart were for the generalized item in the series; please refer to the related data sheet for special items.③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing◆Operation1.Mixing:Stirring A component evenly in the original package, then A, B components according to the weight ratio of 7:1 are weighed and mixed, then start to potting after mixing evenly .2.The B component may appear crystal or caking during storage ( this is normal), if the crystallization need to placed in the oven at 80℃ to melt before using(the containers should be in open state,in order to avoid the gas expansion, damage container), and then cooling to room temperature before using, It does not affect its performance.3.If necessary, the device with good sealing can continue to vacuumize , is helpful to increase the electrical properties of the device.4.The curing conditions: 80 ℃/2hrs or 25 ℃/24hrs.5.For the use of glue equipment please consult our marketing department.◆Package and StoragePackage                                     A component:14kg/ plastic bucket             B component :  1kg/ bottle                   Storage Keep in cool and ventilative place Temperature≤25℃, humidity≤50%RH                                          Shelf life: 12 months both of A and B component◆Safety Operation MaterialMSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or mail to service center sepuna@sepuna.cn , or call +86-400-882-1323.◆Product WarrantyAll product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.

Share  
    | Report bad use or Spam

Contact Qin Gao: High Temperature Potting Compound

Phone: 15216655520

*

*

*



Send me an email with links to manage my Ad

Related Ads

Stainless Steel Profile Wire offer Stationery

Stainless Steel Profile Wire

Stationery - - CNY 10

Profiled or shaped wire can be supplied for many different applications and industries.Features: 1) Material:  2) Standard: AISI, ASTM, DIN, GB, JIS, SUS3) Diameter: 0.8mm-18.0mm4) Surface finish: Ele...

Mirror Stainless Steel Sheet offer Stationery

Mirror Stainless Steel Sheet

Stationery - - CNY 10

316 Stainless Steel Sheet ,SUS316L,S31603,EN1.4404,X2CRNIMO,4 x 8 316L Stainless Steel Sheet Corrosion resistant in a variety of marine and chemical environments and excellent corrosion resistance,wei...

High Manganese Steel Casting Jaw Crusher Spare Parts Jaw Plate For Metso,Terex Pegson,Extec,Trio Etc offer Stationery

High Manganese Steel Casting Jaw Crusher Spare Parts Jaw Plate For Metso,Terex Pegson,Extec,Trio Etc

Stationery - - CNY 10

Product Description: Product:Jaw plate of jaw crusher,high manganese jaw plate Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2(The content of elements can be adjust...

hign manganese steel jaw plate of jaw crusher jaw plate for  metal-scraps shredder offer Stationery

hign manganese steel jaw plate of jaw crusher jaw plate for metal-scraps shredder

Stationery - - CNY 10

Product Description:1.   Product: Jaw plate of jaw crusher,high manganese jaw plate2.   Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2(The content of elements can be adjusted)3.   Brands: ...

Manganese Steel Casting Metso GP11S Cone Crusher Spare Parts Mantle N11941326 And Concave N11941327 offer Stationery

Manganese Steel Casting Metso GP11S Cone Crusher Spare Parts Mantle N11941326 And Concave N11941327

Stationery - - CNY 10

Product Description: Product:Mantle for cone crusher Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certificatio...

High Manganese Cone Crusher Spare Parts,mantle For Cone Crusher offer Stationery

High Manganese Cone Crusher Spare Parts,mantle For Cone Crusher

Stationery - - CNY 10

Product Description: Product:Mantle for cone crusher Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certificatio...

Professional Cone Crusher Concave Manufacturer From China offer Stationery

Professional Cone Crusher Concave Manufacturer From China

Stationery - - CNY 10

Product Description: Product:Bowl liner for cone crusher Material: High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certifi...

Wear Resistant Side Plate,side Liner For Jaw Crusher Spare Parts offer Stationery

Wear Resistant Side Plate,side Liner For Jaw Crusher Spare Parts

Stationery - - CNY 10

Product Description: Product: Side liner of jaw crusher,high manganese side liner Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2(The content of elements can be adju...

Impact Crusher Parts Blow Bars Liners offer Stationery

Impact Crusher Parts Blow Bars Liners

Stationery - - CNY 10

Product Description: Product: High manganese liner plate Material: High Manganese steel Mn13,Mn13Cr2(the content of elements can be adjusted) Brands: Metso ,Sandvik,Kleem...

Grate For Hammer Crusher, Wearing Spare Parts For Hammer Crusher, High Manganese Steel Grate offer Stationery

Grate For Hammer Crusher, Wearing Spare Parts For Hammer Crusher, High Manganese Steel Grate

Stationery - - CNY 10

Product Description:  Product: Manganese Grate for Metal-Scraps Shredder Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certificat...