Offer | Need | All

High Bonding Strength MS Sealant -CNY 10

Publish Date: 30-11-2016 19:08:44 | Contact name: Qin Gao | Location: CHINA | Place: No.1129,Denghui Road,Minhang District,Shanghai,China | 4 times displayed |



If you are planning to wholesale best cheap and high quality high bonding strength ms sealant China, or hot sale high bonding strength ms sealant in China from professional high bonding strength ms sealant manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.MS1937 is a one component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a permanent elastomer. ◆Detailed Product DescriptionProduct descriptionPUNADE MS series is a silane-modified polyurethane sealant, with the advantages of polyurethane and silicone sealants; it is a flexible sealant widely recognized as with the best overall performance, and can meet the needs of adhesive bonding and flexible sealing for a variety of occasions. UNADE MS1937 is manufactured in strict accordance with ISO9001/14001 Quality Assurance System and related protection provisions.Features1.Without VOC, silicone, plasticizer migration, or bubbles curing, with very little odor.2.With a wide range of flexible bonding and durability, primer bonding-free.3.It can be painted, polished, and bonded and repaired in a repeated manner, but necessary surface requirements are not changed when substrates are re-bonded.4.UV resistant, anti-aging and weathering resistance, flooding resistant and mould resistant.5.Dealcoholized curing, no corrosion to substrates, and substrates not polluted, in line with the standard for stone stain resistance.6.Resistant to fresh water, sea water and usually water-based cleaning agents, and has a strong bearing capacity to fuel, mineral oil, vegetable oil and animal fat and crude oil, 7.Intolerant to concentrated organic or inorganic acid/base solution or solvent.8.For specific requirements, we will provide relevant products and advice.Usage1.Good adhesion to many substrates, include wood, various metal and surface treatment (painting or plating), glass, concrete products, mortar, ceramic materials and plastics and rubber and so on.2.Suitable for industrial bonding and fixing (such as the installation of automobile windshield, and the manufacturing of means of transportation and lift cabinets),3.Flexible seal bonding and fixing required for medium strength and high modulus.4.Compatibility test should be done on the actual substrates and in the environment in advance.◆Date TableChemical baseOne-component modified polyurethaneColorWhite, gray, blackandbeigeCuring mechanismMoisture-curingDensityAbout1.5kg/L (based oncolor)ExtrusionrateAbout600g/minAnti-saggingGood,without saggingtrendConstruction temperature5-35℃Surface curing time(dependent onstate of the environment)30minCuring rate(dependent onstate of the environment)3-5days about 13mmShrinkage rateAbout 1%Shore A hardnessAbout 65Glass transition temperature-60℃Tensile strength> 4.0Mpa.Elongation at break>200%Tear strengthAbout16N/mmInterface displacement capacity(ISO11600 and JC485 standard classification)25% (The joint displacement 100%)elasticity modulus(ISO11600 and JC485 standard classification)HM (high modulus)Recommended Substrate(ISO11600 standard classification) F+G (cement and glass)Recommended Substrate(ISO11600 standard classification)M+C+G+Q (metal, cement, glass and others)Operating temperatureLong-term -40℃--+90℃10 hours120℃1 hours145℃Shelf life(sealed storage at below 25℃)12 monthsNotice:The product has passed below test standardsISO11600-2002   Construction structure—Joint products—Classification and requirement of sealants    25HM F+GJC485-92   Elasticity construction sealants for window   MS-1-MCGQ-A-KJC/T883-2001   Construction sealant for stone   I-MS-25HMJC/T884-2001   Construction sealant for Color coated steel   I-MS-25HMJC/T885-2001   Construction sealant for mould proofing   MS-20HM-0◆Operation1) Surface treatmentBonding surfaces should be clean, dry, without grease, oil and dust; for the surfaces difficult for bonding (such as PP/PE material) the bonding effect can be increased by applying primer. For details call us.2) Construction---Rigid packaging: cut the tube mouth.---Flexible packaging: put glue into the glue gun and cut the closed mouth.---In accordance with the designed adhesive strip cutting nozzle, the glue gun for manual hard tube, pneumatic piston glue gun or rubber pump equipment must be used in order to achieve satisfactory sealing effect.---If PUNADE MS1937 will touch with polyurethane bonding glue or paint, we must wait until polyurethane is fully cured before PUNADE MS1937 can be used for jointing or bonding.3) Trimming and finishingTrimming and finishing must be conducted before drying the surface, and prior applicability/compatibility test on the finishing agents or lubricants must be done.4) Cleaning---The PUNADE MS1937 uncured can be removed from tools or equipment, with the use of a suitable solvent or PUNADE Cleaning Paste---Once cured it can only be removed by mechanical method--- Immediately cleaned with industrial hand cleaner and water if stick to skin ---The redundant sealant not used up can be sealed and saved, and the cured part on its surface can be removed before next use. Applicability test is needed.5) Surface painting (when necessary)---PUNADE MS1937 can be available for painting before and after drying the surface.--- A compatibility test should be done before painting.---The thickness and hardness of the paint layer may weaken the elasticity of glue, and it is possible for the paint to be cracking.◆Package and StoragePackage                          Hard tube: 300ml; Hose: 600ML;         Keg: 23L;  Barrel: 195L.Storage and transport Shelf life (sealed storage at below 25℃): 12 months.◆Safety Operation MaterialMSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SEPNA or other distributors, or mail to service center sepna@sepna.cc, or call +86-400-882-1323.◆Product WarrantyAll product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.

Share  
    | Report bad use or Spam

Contact Qin Gao: High Bonding Strength MS Sealant

Phone: 15216655520

*

*

*



Send me an email with links to manage my Ad

Related Ads

Stainless Steel Profile Wire offer Stationery

Stainless Steel Profile Wire

Stationery - - CNY 10

Profiled or shaped wire can be supplied for many different applications and industries.Features: 1) Material:  2) Standard: AISI, ASTM, DIN, GB, JIS, SUS3) Diameter: 0.8mm-18.0mm4) Surface finish: Ele...

Mirror Stainless Steel Sheet offer Stationery

Mirror Stainless Steel Sheet

Stationery - - CNY 10

316 Stainless Steel Sheet ,SUS316L,S31603,EN1.4404,X2CRNIMO,4 x 8 316L Stainless Steel Sheet Corrosion resistant in a variety of marine and chemical environments and excellent corrosion resistance,wei...

High Manganese Steel Casting Jaw Crusher Spare Parts Jaw Plate For Metso,Terex Pegson,Extec,Trio Etc offer Stationery

High Manganese Steel Casting Jaw Crusher Spare Parts Jaw Plate For Metso,Terex Pegson,Extec,Trio Etc

Stationery - - CNY 10

Product Description: Product:Jaw plate of jaw crusher,high manganese jaw plate Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2(The content of elements can be adjust...

hign manganese steel jaw plate of jaw crusher jaw plate for  metal-scraps shredder offer Stationery

hign manganese steel jaw plate of jaw crusher jaw plate for metal-scraps shredder

Stationery - - CNY 10

Product Description:1.   Product: Jaw plate of jaw crusher,high manganese jaw plate2.   Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2(The content of elements can be adjusted)3.   Brands: ...

Manganese Steel Casting Metso GP11S Cone Crusher Spare Parts Mantle N11941326 And Concave N11941327 offer Stationery

Manganese Steel Casting Metso GP11S Cone Crusher Spare Parts Mantle N11941326 And Concave N11941327

Stationery - - CNY 10

Product Description: Product:Mantle for cone crusher Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certificatio...

High Manganese Cone Crusher Spare Parts,mantle For Cone Crusher offer Stationery

High Manganese Cone Crusher Spare Parts,mantle For Cone Crusher

Stationery - - CNY 10

Product Description: Product:Mantle for cone crusher Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certificatio...

Professional Cone Crusher Concave Manufacturer From China offer Stationery

Professional Cone Crusher Concave Manufacturer From China

Stationery - - CNY 10

Product Description: Product:Bowl liner for cone crusher Material: High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certifi...

Wear Resistant Side Plate,side Liner For Jaw Crusher Spare Parts offer Stationery

Wear Resistant Side Plate,side Liner For Jaw Crusher Spare Parts

Stationery - - CNY 10

Product Description: Product: Side liner of jaw crusher,high manganese side liner Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2(The content of elements can be adju...

Impact Crusher Parts Blow Bars Liners offer Stationery

Impact Crusher Parts Blow Bars Liners

Stationery - - CNY 10

Product Description: Product: High manganese liner plate Material: High Manganese steel Mn13,Mn13Cr2(the content of elements can be adjusted) Brands: Metso ,Sandvik,Kleem...

Grate For Hammer Crusher, Wearing Spare Parts For Hammer Crusher, High Manganese Steel Grate offer Stationery

Grate For Hammer Crusher, Wearing Spare Parts For Hammer Crusher, High Manganese Steel Grate

Stationery - - CNY 10

Product Description:  Product: Manganese Grate for Metal-Scraps Shredder Material:High manganese steel Mn13, Mn13Cr2, Mn18, Mn18Cr2 Brands: Metso ,Sandvik,Nordberg, Symons Certificat...